Find similar machines
EUROCHILLER
Eurochiller | Heat exchanger boiler
The EURO CHILLER AIRMIX KIT is engineered to provide precise and reliable thermal control for extrusion processes. It combines a compact water chiller with a high-capacity dry cooler, allowing efficient heat dissipation even under demanding production conditions.
This configuration reduces process fluctuations, stabilizes extrusion temperatures, and minimizes energy consumption by optimizing the balance between active chilling and ambient air cooling.
Water Chiller GCW025 – Stable Process Cooling
The GCW025 water chiller provides controlled and consistent cooling for extrusion equipment such as barrels, screws, calibration units, and auxiliary components. As a result, its integrated buffer tank supports stable operation, even during load variations.
Key technical highlights:
-
Tank capacity: 92 litres
-
Cooling capacity: 29 kW
-
Power supply: 400 V, 50 Hz
-
Installed power: 11 kW
-
High/low pressure rating: 27 / 22 bar
Dry Cooler OFC-KIT110 – High-Capacity Heat Rejection
The OFC-KIT110 dry cooler complements the chiller by efficiently dissipating heat to ambient air. By doing so, this reduces the load on the chiller and therefore improves overall system efficiency, especially in continuous extrusion operations.
Technical characteristics:
-
Cooling capacity: 110 kW
-
Power supply: 400 V, 50 Hz
-
Installed power: 7 kW
-
Current: 15 A
ABF Inverter ABFTIPW.056 – Cold Air Supply for Blown Film Extrusion
The ABFTIPW.056 inverter-driven heat exchanger is designed to meet the thermal demands of blown film die head cooling. At the same time, it supports high cooling capacity while also allowing accurate control over air temperature and flow.
Technical highlights:
-
Cooling capacity: 62 kW
-
Power supply: 400 V, 50 Hz
-
Installed power: 21 kW
-
Current: 60.5 A
-
High/low pressure rating: 27 / 22 bar
Advanced Cooling and Temperature Control Equipment for Extrusion Lines
Efficient temperature control is critical in modern extrusion processes. This advanced cooling solution combines high-performance chilling, dry cooling, and cold air heat exchange to deliver stable, energy-efficient cooling for extrusion lines—especially blown film applications. Designed to integrate seamlessly with existing extrusion equipment, this system supports consistent melt behavior, improved product quality, and reliable long-term operation.
By combining water-based cooling and cold air supply technology on one platform, this setup offers a flexible and scalable approach to cooling extruders, die heads, and downstream equipment.
Contact us to get more information.How do I find the price of this machine?
We are happy to provide you the price for the machine you’re interested in via email. Please use the contact form down below or email us at info@euro-machinery.com. Mention the machine reference number and one of our team members will reach out to you shortly.
Where is the machine located?
Most of our machines are located in Europe, but for specific details on this machine please contact us.
How do I buy a machine?
Send us an inquiry on the machine product page via the contact form and one of our sales managers will get in touch with you shortly. If you need help finding the right machine, please send us an email or call – we are happy to help you. Find more information about how to buy used machines down below.
How does transport work?
Transport is a case by case basis and depends on the size and distance a machine should travel. We work together with the buyer and seller to facilitate transport when a machine is being bought. We have many partners for transport and can help find a supplier to suit your needs.
Eurochiller | Heat exchanger boiler
The EURO CHILLER AIRMIX KIT is engineered to provide precise and reliable thermal control for extrusion processes. It combines a compact water chiller with a high-capacity dry cooler, allowing efficient heat dissipation even under demanding production conditions.
This configuration reduces process fluctuations, stabilizes extrusion temperatures, and minimizes energy consumption by optimizing the balance between active chilling and ambient air cooling.
Water Chiller GCW025 – Stable Process Cooling
The GCW025 water chiller provides controlled and consistent cooling for extrusion equipment such as barrels, screws, calibration units, and auxiliary components. As a result, its integrated buffer tank supports stable operation, even during load variations.
Key technical highlights:
-
Tank capacity: 92 litres
-
Cooling capacity: 29 kW
-
Power supply: 400 V, 50 Hz
-
Installed power: 11 kW
-
High/low pressure rating: 27 / 22 bar
Dry Cooler OFC-KIT110 – High-Capacity Heat Rejection
The OFC-KIT110 dry cooler complements the chiller by efficiently dissipating heat to ambient air. By doing so, this reduces the load on the chiller and therefore improves overall system efficiency, especially in continuous extrusion operations.
Technical characteristics:
-
Cooling capacity: 110 kW
-
Power supply: 400 V, 50 Hz
-
Installed power: 7 kW
-
Current: 15 A
ABF Inverter ABFTIPW.056 – Cold Air Supply for Blown Film Extrusion
The ABFTIPW.056 inverter-driven heat exchanger is designed to meet the thermal demands of blown film die head cooling. At the same time, it supports high cooling capacity while also allowing accurate control over air temperature and flow.
Technical highlights:
-
Cooling capacity: 62 kW
-
Power supply: 400 V, 50 Hz
-
Installed power: 21 kW
-
Current: 60.5 A
-
High/low pressure rating: 27 / 22 bar
Advanced Cooling and Temperature Control Equipment for Extrusion Lines
Efficient temperature control is critical in modern extrusion processes. This advanced cooling solution combines high-performance chilling, dry cooling, and cold air heat exchange to deliver stable, energy-efficient cooling for extrusion lines—especially blown film applications. Designed to integrate seamlessly with existing extrusion equipment, this system supports consistent melt behavior, improved product quality, and reliable long-term operation.
By combining water-based cooling and cold air supply technology on one platform, this setup offers a flexible and scalable approach to cooling extruders, die heads, and downstream equipment.
Contact us to get more information.- I would like to know the price of this machine
- Where is the machine located?
Interested in this machine?
Explore our most popular categories
Buy used machinery in 3 easy steps
1. Search and choose
Use our search bar to find the perfect machine for your needs. Explore recycling machines, extrusion lines, flexo printers, and more. Not sure of the name? Just search any requirement, and get relevant results.
2. Inquire
To inquire about a machine, click the ‘Request price’ button near the machine you’re interested in. We’ll promptly send you an offer with details and pricing.
3. Inspect the machine
We’re excited to showcase the machine to you. Choose in-person or e-inspection via video. After inspection, we’ll negotiate for a complete agreement. Our services include logistics, dismantling, and potential machine replacement.
European brands
We deal with high quality European machinery
Fast availability
Buying used machinery often results in quicker installation than buying new ones
Sustainable
We keep used equipment in circulation and give it
a second life
Free promotion
We promote your machines free-of-charge through our marketing channels
European brands
We deal with high quality European machinery
Fast availability
Buying used machinery often results in quicker installation than buying new ones
Sustainable
We keep used equipment in circulation and give it
a second life
Save on costs
We promote your machines free-of-charge through our marketing channels
Europe's largest machine trader in used machinery
Each sales journey is as unique as the machinery we trade. We pride ourselves on crafting personalized experiences that cater to your specific needs. Our commitment revolves around securing the optimal price for you swiftly and seamlessly.
We carefully streamline your machine’s data, ensuring it is primed for the sales spotlight. Our dedication extends to investigating transportation, shipping, and logistics, transforming the entire globe into your marketplace through our strategic efforts.
10,000+ customers worldwide trust us
10,000+ customers worldwide trust us
Looking to buy or sell used machines?
We deal in a variety of used machinery for the flexible converting industry, including extruders, recycling machines, granulators, shredders, bag making machines, printing machines, winders, slitters, laminating machines, and more. We facilitate factory-to-factory sales, allowing customers to inspect machinery in production, providing them the opportunity to see the origins and quality of the machines.
